Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Accept AMJ-S/AMJ Cat. 8.1 RJ45 jacks for twisted pair cables. AMJ-S and AMJ Cat. 8.1 jacks can be mixed in the same HD³ module as in the appropriate modules. Slots in 1 HU panels also accept two modules of half height stacked upon
each other.
Please order RJ45 jacks separately.
Performance characteristics
Modules in standard non-recessed position can be exchanged quickly without the need for special tools
Up to 48 RJ45 jacks per HU
Modules can be installed in recessed position in the panels
Mechanical attributes
| Material: housing |
zinc diecast
|
|---|
| Insertion force |
≤ 30 N
|
|---|
| Material: insulating housing |
-
|
|---|
| Life (mating cycles RJ45, RJ12, RJ11) |
≥ 750
|
|---|
| Material: snap-fit |
phosphor bronze tinned
|
|---|
| Cu-Conductor diameter: solid |
0.41 - 0.64 mm AWG 26/1 - AWG 22/1
|
|---|
| Material: shield |
German silver
|
|---|
| Cu-Conductor diameter: stranded |
0.46 - 0.76 mm AWG 27/7 - AWG 22/7
|
|---|
| Material: insulators |
PC UL94 V0
|
|---|
| Core Diameter |
0,9 - 1,6 mm
|
|---|
| Material: PCB |
FR4
|
|---|
| Reusable IDC for AWG 22/1 and AWG 22/7 |
≤4 cycles
|
|---|
| Material: PCB finish |
chem. tin-plated
|
|---|
| Reusable IDC für AWG 23/1 - AWG 26/1 |
≤10 cycles
|
|---|
| Material: contact spring |
phosphor bronze tinned
|
|---|
| Reusable IDC for AWG 24/7 - 27/7 |
≤10 cycles
|
|---|
| Material: contact spring finish |
min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni
|
|---|
| Cable diameter |
max. 9 mm
|
|---|
| Material: contact IDC termination |
CuNi2Si
|
|---|
| Material: IDC termination finish |
min. 3-6 µm (120-240 µin) Sn
|
|---|
| Material: cable clamp |
PC UL94 V0
|
|---|
Thermal and climatic attributes
Elecrical attributes
| Contact resistance |
≤ 20 mΩ
|
|---|
| Insulation resistance |
≥ 500 MΩ
|
|---|
| Voltage proof: contact-contact |
≥ 1000 V, DC
|
|---|
| Voltage proof: contact-shield |
≥ 1500 V, DC
|
|---|
| Current carrying capacity at 50°C |
1 A
|
|---|
| PoE+ acc to IEEE 802.3at |
Adequate for Power over Ethernet+
|
|---|
Transmission properties
| Category 6^A (Component) |
ISO/IEC 11801, DIN EN 50173-1
|
|---|
| Class E^A (Permanent Link) |
ISO/IEC 11801, DIN EN 50173-1
|
|---|
| Class E^A (Channel) |
ISO/IEC 11801, DIN EN 50173-1
|
|---|
| Class E (Channel with Coupler Cat.6) |
-
|
|---|
| Class D (Channel with Coupler Cat.5e) |
-
|
|---|
| Gigabit Ethernet acc. to IEEE 802.3 |
fulfilled
|
|---|
| 10 Gigabit Ethernet acc. to IEEE 802.3an |
fulfilled
|
|---|
Norms
| Connectors |
IEC 60603-7-51
|
|---|
Environmental requirements
| Ambient temperature |
-40° C to +85° C
|
|---|
