STX SC-RJ/2SC adaptor SM
STX SC-RJ/2SC adaptor SM
Technical attributes
| Article name | FO-C coupl SCRJ SM |
|---|---|
| Description | STX FO adaptor |
| Connector type | 2SC/SC-RJ |
| Fiber type | Singlemode |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
Mechanical attributes
| Bauform | connector type SC according to IEC 61754-4 |
|---|---|
| Durability | ≥ 1000; POF/PCF: ≥ 500 |
| Hex crimp size for strain relief | 4.52 x 10 mm |
| strain relief | ≥ 100 N |
| Colour: connector housing / adaptor housing | Multimode: beige, blue, aqua, black, purple; Singlemode: blue; Singlemode APC: green; POF: yellow; PCF: red |
| Material: connector ferrule | Zirkonia ceramic, POF: german silver , PCF: nickel |
| Material: adaptor split sleeve | Zirkonia ceramic or phosphor bronze |
| Material: connector body | copper alloy, nickel-plated |
| Material: plug housing, boot, dust caps | brass, 5 µm Ni plated |
| Material: adaptor housing | thermoplastic, flame retardant, non halogen, or zinc diecast, nickel-plated |
| Material: retaining clip (adaptor) | Stainless steel |
| Durability (Matings) | ≥ 500 |
| Insertion force | ≤ 30 N |
| Material: housing | PBT blue |
| Material: clamps | PBT blue |
| Material: split sleeve | Zirkoniakeramik |
| Material: protection cap | TPE, black |
Thermal and climatic attributes
| Operating temperature in °C | -20° to 80° C |
|---|---|
| Storage temperature in °C | -40° to 90° C |
Optical attributes
| Insertion loss: plug (factory assembly) | Multimode: max. 0.4 dB¹; Singlemode/Singlemode APC: max. 0.5 dB¹; POF: 1.5 dB; PCF: 1.0 dB |
|---|---|
| Insertion loss: Adaptor | Multimode/Singlemode: max. 0.2 dB¹; Singlemode APC: 0.2 dB¹ |
| Return loss: plug (factory assembly) | Multimode: min. 30 dB²; Singlemode: min. 40 dB²; Singlemode APC: min. 60 dB² |
| Insertion loss | max. 0.5 dB |
| Return loss | min. 40 dB |
Norms
| Degrees of protection provided by enclosures (IP code) | IEC 60529 |
|---|---|
| Fiber optic interconnectiong devices and passive components- Basic test and measurement procedures | IEC 61300-2-x; IEC 61300-3-x |
| Generic cabling systems | ISO/IEC 11801; EN 50173-1; ISO/IEC 24702; IEC 61918 |
| Custom-designed cabling systems | PROFINET Installation Guideline |
| Connectors | ähnlich IEC 61754-24; ähnlich EN 50377-6 |