STX V14 central bulkhead set, metal, RJ45 coupler. Cat.6 Class EA, round mount. cutout
STX V14 central bulkhead set, metal, RJ45 coupler. Cat.6 Class EA, round mount. cutout
Technical attributes
Article name | CU-CN STXV14 bhdset co CEA mtl |
---|---|
Description | STX V14 central bulkhead set |
insert | RJ45 coupler Cat.6 Class EA |
Remarks | round mounting cutout |
Mount. dim. | Z133 |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
For the installation of data networks as per IEC 61918, IEC 61784-5 and PROFINET system guide, Telegärtner recommends for harsh environments the Push-Pull connector of Variant 14 acc. to IEC 61076-3-117. Moreover this connector series is compliant to the requirements of AIDA (Automation Initiative of the German Automotive Industry) guaranteeing protection class IP67. The modular principle - which is used on all connectors with STEADYTEC®-Technology - allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 inserts stand out due to high power reserves and offer transmission characteristics up to 10 Gbit Ethernet. The FO plug and bulkhead inserts are available for GOF and POF/PCF fibres and provide the most suitable solution for every application.
Performance characteristics
NBR aiguilette at the protection cap
bay for marking labels
bulkhead version having rectangular cutout for mounting with M3 screws
bulkhead version having round cutout for central screw mounting
rugged zinc-diecast housing, nickel-plated
protection class IP67
plug housing suitable for cables with diameter 5-10 mm
pre-assembled plugs and set products for simple assembly
available with RJ45 Cat.6A, Cat.6 Class EA, USB or FO insert
Mechanical attributes
Housing | metal |
---|---|
Construction | symmetric |
Material: housing | zinc diecast |
Material: insulating housing | - |
Material: snap-fit | phosphor bronze tinned |
Material: shield | German silver |
Material: insulators | PC UL94 V0 |
Material: PCB | FR4 |
Material: PCB finish | chem. tin-plated |
Material: contact spring | phosphor bronze tinned |
Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
Material: contact IDC termination | CuNi2Si |
Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
Material: cable clamp | PC UL94 V0 |
shielding contact | advanced resistance to vibration and shock by the use of 4 springs at the shroud |
Thermal and climatic attributes
UL | E244889 |
---|---|
Temperature range [°C] | -40/ 80 |
Elecrical attributes
Contact resistance | ≤ 20 mΩ |
---|---|
Insulation resistance | ≥ 500 MΩ |
Voltage proof: contact-contact | ≥ 1000 V, DC |
Voltage proof: contact-shield | ≥ 1500 V, DC |
Current carrying capacity at 50°C | 1 A |
PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
Transmission properties
Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
---|---|
Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
Class E (Channel with Coupler Cat.6) | - |
Class D (Channel with Coupler Cat.5e) | - |
Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
Category | Cat.6 |
Norms
Connectors | IEC 61076-3-117 |
---|---|
Degrees of protection provided by enclosures (IP code) | IEC 60529 |