STX V4 surface mounting outlet, plastic, RJ45 jackA Cat.6A, incl. protective cap
STX V4 surface mounting outlet, plastic, RJ45 jackA Cat.6A, incl. protective cap
Technical attributes
| Article name | CU-Out STXV4 SM STXRJ45mo C6A T568A |
|---|---|
| Description | STX V4 surface mounting outlet |
| Housing | plastic |
| insert | RJ45 Modul A Cat.6A |
| Remarks | including bulkhead protective cap |
| Protection class | IP67 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
The standard for generic cabling in industrial premises ISO/IEC 24702 resp. EN 50173-1 and -3 stipulates the connector of Variant 4. This, extraordinary space saving connector provides a 10 Gbit-link to the machine while having the same installation dimensions as a 4-way M12 connector. The connectors of Variant 4 are standardized in the IEC 61076-3-106, designed to meet the demands of harsh industrial environments, guaranteeing protection class IP67 whether mated or unmated (using the IP67 protection cap). Furthermore, the modular principle -which is used on all connectors with STEADYTEC®-Technology allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 plug and bulkhead inserts stand out due to high power reserves and offer transmission characteristics of Class EA acc. to ISO/IEC11801. The FO plug and bulkhead inserts are available for GOF and POF-fibres and provide the most suitable solution for every application.
The specification of a Telecommunications Outlet (TO) is based on ISO/IEC 24702 which refers to ISO/IEC 11801. It is one of the functional elements of a generic cabling for industrial premises in areas subject to extreme ambient stresses due to temperature, dust, moisture or splashing water. For this purpose Telegärtner offers industrial outlets with mounted bulkheads of Variant 4. They are used to connect devices or complete automation islands. The unbreakable, powder-coated housings in RAL 7001 are available as single- or double gang versions in protection class IP67, allowing installation direct in manufacturing environments.
Performance characteristics
available in 2 sizes, for 1 or 2 ports
robust aluminium housing AL-Si 12
floor or wall mounting
including IP67 bulkhead protective cap
cable entry from the top or rightwards
powder-coated in RAL 7001
protection class IP67
plastic cable glands M16
assembled with bulkhead Variant 4
available with RJ45 Cat.6A, Cat.6 Class EA, USB or FO insert
Mechanical attributes
| Insertion force | ≤ 30 N |
|---|---|
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Cu-Conductor diameter: solid | 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
| Cu-Conductor diameter: stranded | 0.46 - 0.76 mm AWG 27/7 - AWG 22/7 |
| Core Diameter | 0,9 - 1,6 mm |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
| Cable diameter | max. 9 mm |
| Material: housing | zinc diecast |
| Material: insulating housing | - |
| Material: snap-fit | phosphor bronze tinned |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
| Material: PCB | FR4 |
| Material: PCB finish | chem. tin-plated |
| Material: contact spring | phosphor bronze tinned |
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
| Material: contact IDC termination | CuNi2Si |
| Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
| Material: cable clamp | PC UL94 V0 |
Thermal and climatic attributes
| UL | E244889 |
|---|
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
| PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
Transmission properties
| Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
Norms
| Connectors | IEC 60603-7-51 |
|---|
Environmental requirements
| Ambient temperature | -40° C to +85° C |
|---|