STX V5 bulkhead set RJ45 module A Cat.6A metal
STX V5 bulkhead set RJ45 module A Cat.6A metal
Technical attributes
| Article name | CU-CN STXV5 bhdset mo C6A T568A mtl |
|---|---|
| Description | STX V5 bulkhead set |
| insert | RJ45 Modul A Cat.6A |
| Housing | aluminium diecast |
| Mount. dim. | Z126 |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
The Connectors of Variant 5 (Heavy Duty Connector), mostly common from the railway supply industry, wind powerand mechanical engineering feature a secure and easy locking using a bail. The connectors of Variant 5 are standardized in the IEC 61076-3-106, designed to meet the demands of harsh industrial environments, guaranteeing protection class IP67 whether mated or unmated (using the IP67 protection cap). Furthermore, the modular principle - which is used on all connectors with STEADYTEC®-Technology - allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 plug and bulkhead inserts stand out due to high power reserves and offer transmission characteristics of Class EA acc. to ISO/IEC11801.
Performance characteristics
storage of cables with diameter 5...10 mm
simple mounting of bulkheads with 2 screws
NBR aiguilette at the protection cap
rugged aluminium diecast housing
protection class IP67
Variant 5 acc. to IEC 61076-3-106
pre-assembled plugs and set products for simple assembly
Mechanical attributes
| Insertion force | ≤ 30 N |
|---|---|
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Cu-Conductor diameter: solid | 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
| Cu-Conductor diameter: stranded | 0.46 - 0.76 mm AWG 27/7 - AWG 22/7 |
| Core Diameter | 0,9 - 1,6 mm |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
| Cable diameter | max. 9 mm |
| Material: housing | zinc diecast |
| Material: insulating housing | - |
| Material: snap-fit | phosphor bronze tinned |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
| Material: PCB | FR4 |
| Material: PCB finish | chem. tin-plated |
| Material: contact spring | phosphor bronze tinned |
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
| Material: contact IDC termination | CuNi2Si |
| Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
| Material: cable clamp | PC UL94 V0 |
Thermal and climatic attributes
| UL | E244889 |
|---|
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
Transmission properties
| Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
Norms
| Connectors | IEC 60603-7-51 |
|---|
Environmental requirements
| Ambient temperature | -40° C to +85° C |
|---|
