Outlet AMJ45 8 K Up/50 Cat.6A alpine white
Outlet AMJ45 8 K Up/50 Cat.6A alpine white
Technical attributes
Article name | CU-Out AMJ45 8K UP/50 C6A cduct alpwt |
---|---|
Type | cable duct mounting, 1xRJ45 |
Colour | alpine white |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Performance characteristics
Transmission performance: Cat.6A acc. to ISO/IEC 11801; EN 50173-1
Fully shielded
360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
Can be wired up from all directions, in 8x45° steps
Either horizontal or vertical installation in the cable duct as a result of variable cable inlet
Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box
Option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm
Compatible with a wide variety of faceplates of leading manufacturers
Independent AP design available, an AP add-on set is not required
Faceplate can be retrofitted with a flip-up loss-proof, transparent label field
Protection flaps
Single (8) and double (8/8, 2x8(4)) outlets available
Stable, compact, ergonomic construction, that provides secure hold during installation
Mechanical attributes
Insertion force | ≤ 30 N |
---|---|
Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
Conductor diameter | solid 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
Core Diameter | 0,7 - 1,6 mm |
Material: housing | zinc diecast |
Material: insulators | PA, PBT, ABS, PC |
Material: PCB | FR4 UL94 V0 |
Material: PCB finish | tin plated |
Material: contact spring | CuSn, spring steel |
Material: contact spring finish | min. 0,8 µm Au on 1,2 µm Ni |
Material: contact IDC termination | CuZn |
Material: IDC termination finish | tin plated |
Elecrical attributes
Contact resistance | ≤ 20 mΩ |
---|---|
Insulation resistance | ≥ 500 MΩ |
Voltage proof: contact-contact | ≥ 1000 V, DC |
Voltage proof: contact-shield | ≥ 1500 V, DC |
Current carrying capacity at 50°C | 1 A |
PoE+ acc to IEEE 802.3at | Cat.6A, Class EA 500 |
PoE according to IEEE802.3af | Cat.5e |
PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
Transmission properties
Category 6^A (Component) for products Cat.6^A | ISO/IEC 11801, DIN EN 50173-1 |
---|---|
Class E^A (Permanent Link) for products Cat.6^A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
Class E^A (Channel) for products Cat.6^A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
Category 5e | ISO/IEC 11801, DIN EN 50173-1 |
Gigabit Ethernet acc. to IEEE 802.3 | for Cat.5e |
10 Gigabit Ethernet acc. to IEEE 802.3an | for Cat.6A, Class EA 500 |
Norms
Connectors | IEC 60603-7-51 / -7-3 |
---|
Environmental requirements
Ambient temperature | -40° C to + 70° C |
---|