01.10.2023 /Worth knowing

Push & Crimp: N and SMA Connector

Telegärtner presents an innovation in the field of connection technology with the N connector in the Push & Crimp version. The Push & Crimp series is characterized by quick, easy and reliable installation on site, no soldering is required. The availability of simple tools for cable preparation further simplifies the installation process. Reliable sealing and protection against environmental influences is guaranteed with the enclosed shrink tubing (IP67).

N Connector

The N series is a very popular and widely used medium sized coaxial connector. In the Push & Crimp series these N connectors can be used up to a frequency of 6 GHz. The characteristic impedance is 50 Ω. The N Push & Crimp series was developed for Low Loss 195, Low Loss 240 and Low Loss 400 cables with solid inner conductors. The cables can be assembled directly in the fi eld by simply pushing in the cable´s inner conductor and crimping the outer conductor. Very good return loss (VSWR) are achieved thanks to their practical design. The vibration-resistant N series connectors provide a medium power RF solution for signal and data transmission. Mating face sealing between plug and jack, in mated condition, is in accordance with IP 67 (IEC 60529). Cut to length shrink sleeves are included with the connectors as strain reliefs and to protect the cable connection from moisture and dust.

SMA Connector

The SMA series connectors are very commonly used coaxial connectors with threaded coupling. These connectors, in the Push & Crimp series, can be used up to a frequency of 6 GHz. The characteristic impedance is 50 Ω. The SMA Push & Crimp series is designed for Low Loss 195 and Low Loss 240 cables with a solid inner conductor. Cables are assembled directly in the fi eld by simply pushing in the cable`s inner conductor and crimping the outer conductor. SMA connectors are used in mobile radio, satellite and measurement technology, among other applications. Mating face sealing between plug and jack, in mated condition, is in accordance with IP 67 (IEC 60529). Cut to length shrink sleeves are included with the connectors as strain reliefs and to protect the cable connection from moisture and dust.